Home > OE Hand Grinder Parts > Pharos Grinder Parts

Pharos 1.0 to 2.0 Upgrade Kit for FINE THREAD

Part Number PHA-K01-FT
Pharos 1.0 to 2.0 Upgrade Kit for FINE THREAD
Pharos 1.0 to 2.0 Upgrade Kit for FINE THREAD
Email a friend Email a friend
Your Price:  
In Stock
Share |
You need to be a registered customer to order this product. Please Login to your account or click here to Register.
Upgrade kit for Pharos 1.0 (with FINE thread axle - 20 TPI) to bring it up to the current 2.0.   If you are not sure which you have, take the top cap off your axle, and measure 1", and count the threads - 20 threads per inch = FINE.
  • Decal Index Sticker for top plate
  • Axle
  • Lower Bushing Support with Bushing
  • 3 Plate Springs
  • Spring Plate
  • Catch Cup
This kit is for Pharos 1.0 FINE thread Manual Coffee Grinders only - check for the serial number on the bottom of your grinder, and check the axle top threading to be sure!  These were hand made, in Idaho, and all were serial numbered.  Video instructions on installation are available below, or on youtube.

If your grinder has plastic bolt covers, we recommend replacing them with aluminum bolt covers (sold separately).

Our earliest Pharos grinders had a coarse pitch thread at the top of the axle shaft -  1/2" x 13 TPI thread.  Later version has FINE thread - 1/2" x 20 TPI thread.  This threading is critical to match the threading on the handle and top cap....  We are a bit chagrined to not have records that tell us when we changed, or which grinders have which thread...  The records of that, seem to be in Doug's head, and inaccessible through any means of data retrieval... So, the best thing to do is check your axle threading before you order - it's simple to do.  

Recently Viewed Items
  • Visa
  • Mastercard
  • Amex
  • Discover